Altenew Educator Certification Program (AECP) – Masking Unleashed

Masking is one of those techniques that sometimes you don’t even realize you’re doing. However, there are a ton of tricks that you can do with masking – some of which were new to me as I was going through the Masking Unleashed class as a part of the Altenew Educator Certification Program. Today’s cards use simple masking and negative space masking together on each card.

Alright…so first things first. I started off with using Altenew’s Caps Bold Alphabet Die to cut out “H E Y” out of Inkadinkado’s Stamping Mask Paper– This will be for my positive space mask. To make sure that the word is aligined properly by lining the letters up on the grid lines of my Tim Holtz Tonic Glass Media Mat.

Once lined up I then used a piece of Therm-O-Web Purple Tape to hold the dies in place.

Then I placed the dies on the Masking Paper and ran it through my Spellbinders Platinum 6 Die Cutting Machine and pulled out the die cuts.

Then I placed the Die cut Masking paper pieces on an A2 panel of Neenah Solar White cardstock. Then I lined up Altenew’s Square Weave Pattern Stencil and adhered it using purple tape.

Then I grabbed Tim Holtz for Ranger Distress Oxide Inks in Twisted Citron, Spiced Marmalade and Candied Apple. Using Ranger Mini Ink Blending Tools I inked up the panel overlapping the colours for a cleaner blend – Twisted Citron to Spiced Marmalade to Candied Apple.



Then I removed the stencil to see the really pretty blended panel. reveal the sentiment…I slowly removed the masked letter with tweezers to reveal the Neenah Solar White letters beneath.

Then I lined up the die letters again and secured using purple tape by lining it up over the clean letters on the blended panel – in retrospect I should’ve kept the letters together from the first cut run…but you live, you learn!

Then I ran the letters through my die cutting machine again but this time over an A2 panel of printer paper.

I adhered the printer paper using temporary adhesive to my blended panel. I opted to use printer paper instead of masking paper, as it’s a big piece and I didn’t want to use up the masking paper. So i’m using the pauper’s method of masking 🙂

Then I placed the panel into my stamping tool – I use the My Sweet Petunia’s MISTI Stamping Tool. I added a bit of removable adhesive to the back of the panel as I won’t be able to use magnets with a background stamp. I’m using Altenew’s Dainty Swiss Dots stamp set and Altenew’s Obsidian Pigment Ink. Be sure to really press down on the door of your stamping tool as there is a slightly raised edge where the printer paper cut outs are and you want to really make sure the dots get through.

After stamping down…here is the result.

I removed the printer paper mask to see the result. I could’ve lined the letters with a black pen for some added contrast, but I opted to leave it as is.

Now…a small pause from card 1, to show you the start of card 2.

Here I grabbed an A2 panel of Neenah Solar White cardstock and applied the printer paper mask with a little additional temporary adhesive, focusing on the smaller pieces within the “H” and the “Y” to make sure they stayed down.

Then I grabbed my blending brushes again, as well as the Distress Oxide Inks again in Twisted Citron, Spiced Marmalade & Candied Apple. I applied a generous amount of ink to the panel through the die cuts. I wanted to get a very saturated colour, so I applied a few times.

I removed the printer paper panel to reveal the vivid colours of the HEY.

Then I applied the die cut masking paper previously cut out and used on card #1 and applied them over the Oxide panel to cover the letters.

I placed the panel into the MISTI and then using the Dainty Swiss Dots background stamp and Altenew’s Obsidian Pigment Ink and stamped it down. Again, I was sure to press firmly, especially around the masked die cut letters.

Then for the reveal…I removed the masking paper to reveal the very vivid colours of the sentiment “HEY”.

Alright…now back to the sentiment trips for both cards. I wanted a bit more black on the card to help allow the colours to POP! I used sentiments from the Swiss Dainty Dot stamp set and grabbed “be yourself” and “you’re awesome” and used Tsukineko’s Versamark Ink  and Brutus Monroe’s White Alabaster Embossing Powder to heat emboss on Simon Says Stamp’s Cardstock in Black.

I adhered the panels to A2 sized card bases and then I trimmed down the sentiment strips and used some Simon Says Stamp Big Momma Foam Tape to pop up the sentiment near the bottom of the panels.

Then I added some washi tape to coordinating envelopes and the cards are complete!

Altenew Stamps/Dies/Stencils:

Square Weave Pattern Stencil

Caps Bold Alphabet Die

Dainty Swiss Dots stamp set


Altenew Obsidian Pigment Ink

Tsukineko’s Versamark Ink

Ranger Distress Oxide by Tim Holtz – Candied Apple

Ranger Distress Oxide by Tim Holtz – Twisted Citron

Ranger Distress Oxide by Tim Holtz – Spiced Marmalade

Other Supplies:

– Neenah Solar White cardstock (SSS)

Simon Says Stamp’s Cardstock – Black

Inkadinkado’s Stamping Mask Paper

Brutus Monroe’s White Alabaster Embossing Powder

Tombow Mono Multi Liquid Glue (SSS)

Simon Says Stamp Big Momma Foam Tape (SSS)


– My Sweet Petunia’s MISTI Stamping Tool (SSS)

Tim Holtz Mini Comfort Trimmer (SSS)

Tom Holtz Tonic Glass Media Mat

Simon Says Stamp’s Acrylic Blocks (SSS)

Simon Says Stamp’s Grid Transparency (SSS)

WOW Dual Speed Heat Tool (SSS)

Spellbinders Platinum 6 Die Cutting Machine

-Therm-O-Web Purple Tape

Ranger Mini Ink Blending Tools

Birthdays Galore!

Alright… So there are A LOT of birthdays coming up…which translates to a lot of cards to be made.

This time around I’ve opted to try Ranger’s Transfer Foil with double sided tape for a simple yet shiny card. I think it turned out pretty well. I love the look of foil but haven’t had time to try foiling with a laminator and toner sheets… But after this I’m willing to try.

Using double sided tape placed diagonally across the page, relitively evenly spaced. I then removed the tape paper and rubbed the foil sheets across the adhesive. Voila! I did have to go over a few spots with more foil to fill in a few gaps, then patted the surface with my anti-static bag to remove any left over adhesive.


– Ranger Shiny Transfer Foil Sheets

– Ranger Letterit ‘Birthday’ Designed by Taylor Huizenga

– Simon Says Stamp’s Cardstock

– Simon Says Stamp’s Dye inks

Another super simple card.. Black and white with a pop of red peeking out.


– Simon Says Stamp’s Dye inks

– Simon Says Stamp’s Cardstock

– Pinkfresh’s ‘Scripted Bold Sentiments 2’ stamp set

– Simon Says Stamp’s ‘Geometric Pattern Builder’ stamp set

CAS(E) Card Challenge #312 (cts#312)

Another Card Challenge!

CAS(E) Card Sketch Challenge #312:

Below is my submission:

My card features:

1. Carta Bella Spring Market 6×6 Paper Pad (cbsm80023)

2. Simon Says Stamp “Moments of Grace” stamp set (sss101951)

3. Ranger’s Distress Oxide ink

4. We R Memory Keepers’ Precision Stencil (stripes)

5. Recollections “Gold” Embossing powder

Card Challenge: Paper Craft Crew (PCC328)

Here is yet another challenge.

Paper Craft Crew Challenge #328 : Simple Stamping (PCC328)

Here is the sketch:

#pcc328 #simplestamping

Here is my submission using MFT’s Color Drops stamp set (CS-207), Joy Clair’s ‘Hello Sentiments’ stamp set (JC-02110), Ranger liquid pearls, Nuvo Shimmer pen, Simon says stamp dye ink and some embelishments:

#simonsaysstampink #pcc328 #simplestamping